Pedestrian injuries are the most common injury to children on Halloween. Whether you have toddlers or teens, some planning and safety precautions can help prevent accidents and keep your trick or treaters safe.

Always opt for sidewalks, if available, rather than walking in the street. Some costumes and clothing are difficult to see in the dark and you may not be visible to drivers when walking in the roadway. Cross the street at corners or intersections and never cross between parked cars or from driveways. Even if crosswalks are present, try to make eye contact with drivers before crossing in front of them. 

According to the Governors Highway Safety Association, 80% of pedestrian fatalities in Texas occur after dark. Trick or treat in familiar, well-lit areas and walk in groups. There is safety in numbers. 

Kids and cars can be frighteningly unpredictable. Avoid distractions while trick or treating by keeping your cell phone safely tucked away. Keep your head up and focus on pedestrian safety. 

When planning costumes, avoid masks that can obstruct a child's vision. To brighten up dark costumes, have your child wear or carry glow sticks or attach reflective tape to their costume or trick or treat bag.

Happy trick or treating. Stay safe.

According to the National Safety Council, children are more than twice as likely to be hit by a car and killed on Halloween than on any other day of the year. Whether you’re driving to a Halloween party or just home from work, extra caution can go a long way on Halloween. 

The speed limit in most residential neighborhoods is 30 miles per hour. According to research by ProPublica, when struck by a vehicle at 30 miles per hour, a person has an 80% chance of survival. That chance goes up to 93% if the vehicle is driving 20 miles per hour. Plan to leave home or work early to allow any extra time it may take to drive well below the posted speed limit.

Pay close attention to vehicles parked on the street and in driveways. They could be dropping off children who are excited about trick or treating and may unexpectedly dart into the roadway. 

Turn signals benefit pedestrians just as much as other vehicles. Make sure to use your blinkers even when no other vehicles are around. There may be pedestrians watching to see which way you are going. If you are stopping to pick up or drop off children, use your hazard lights to get the attention of other drivers. 

With all the extra pedestrian traffic on Halloween, take extra care to focus on driving safety and avoid distractions. Silence your phone before driving and turn off the radio. Wait to talk, text, and surf the internet once you have safely reached your destination. 

Safe driving habits help prevent accidents. Happy Halloween driving. Stay safe. 

​We’re still a ways from colder weather here in the Houston area, but it’s not too early to get your fireplace winter ready. Since most fireplaces in our area don’t get heavy use, the annual maintenance is pretty simple. We also have a few tips for best operation of your fireplace.
​
​
​Gas fireplaces are generally lower maintenance than their wood burning counterparts, but they do require some attention each year prior to use. Before getting started, make sure the fireplace and glass are completely cool and that the gas valve is in the off position. If your gas fireplace has a decorative barrier, go ahead and remove it.

1. Inspect the glass for scratches, cracks and breakage. If the glass is damaged in any way, the fireplace should not be used until the glass is replaced.
2. Inspect the gasket between the glass and fireplace for an airtight seal to ensure gases are trapped inside the fireplace when in use.
3. Clean both sides of the glass with a soft cloth and fireplace glass cleaner. Don’t use regular glass cleaner, such as Windex, as it contains ammonia which will react with the gas when the fireplace is lit.
4. Vacuum out any dirt or dust from inside and outside the firebox.
5. Inspect the interior of the firebox for rust or flaking of paint and to ensure nothing is obstructing the pilot. If you notice rust or paint issues, it can be corrected DIY but it’s very important that you use products designed specifically for this use.
6. Close the glass, reinstall the decorative barrier, and turn the gas valve back on.
7. For vented gas fireplaces, inspect the vent to ensure it is free of debris such as bird or squirrels’ nest and leaves.
8. Test your smoke detectors and carbon monoxide detectors.
9. Test the igniter to ensure it lights smoothly and without delay.  

​Wood burning fireplaces come in two varieties, those with a gas log lighter and those without. All steps will be the same with the exception of #7 which only applies if you have a gas log lighter. Make sure the fireplace is completely cool before beginning.

​​

1. Check the operation of the damper to make sure it opens easily and completely. Inspect it for any signs of cracking or rusted through areas. If the damper is in poor shape and needs to be replaced, contact a professional as this is not a DIY job.
2. Inspect the flue to ensure it is clear and free of damage. If you notice heavy creosote buildup, contact a professional chimney sweep.
3. Inspect the protective screening or door to ensure it is in good condition and will prevent embers and ashes from escaping.
4. Inspect the chimney cap to confirm it is securely in place. If you have a mesh type material over the open sides to keep rain, debris, birds and squirrels out, ensure it is in good condition. If you don’t already have this or you need to replace it, make sure to use a non-combustible material approved for this use.
5. Trim any tree limbs that are encroaching on the chimney. Tree limbs can obstruct draft airflow and create a fire hazard.
6. Test smoke detectors and carbon monoxide detectors.
7. Test the igniter to ensure it lights smoothly and without delay.
8. Make sure no combustible materials are ever located within 12 inches of the fireplace opening while in use. 

If you are ever uncomfortable performing the annual fireplace maintenance yourself, or if you find anything out of the ordinary during your inspection, contact a local professional to help you out. 

​There’s nothing quite like a warm, cozy fire on a cold winter night. For the best fire and easiest ongoing maintenance of your fireplace, check out these tips.

1. Make sure the wood is completely dry before burning it. Hardwoods like hickory, pecan, and oak burn longer while soft, resinous woods like pine burn faster and produce more creosote.
2. Never burn painted or treated wood, construction scraps, or lumber in your fireplace as it can release harmful chemicals into your home.
3. Crack a window in the room to prevent the room from becoming smoky. Run ceiling fans clockwise on low speeds to circulate the warm air from the ceiling to the living area.
4. Use kindling to help start the fire rather than flammable liquids.
5. Keep the fire small as large, high heat fires produce more smoke creating more creosote which will require more maintenance in the future.
6. Since wood attracts bugs, only bring inside the amount of wood you need and make regular trips outdoors to get more. 
7. Keep the damper closed when the fireplace is not in use to prevent warm indoor air from escaping.  

 
We hope you are as excited as we are for the colder weather to get here and that you enjoy your winter and your fireplace.